Hi,
Does anyone know if it's possible to increase the radius of the arbiter tech Recall and how to do it?
Thx.
Increasing Recall radius
-
- Terran Settler (Unemployed)
- Posts: 3
- Joined: Tue Nov 05, 2013 5:13 am
- IskatuMesk
- Xel'naga World Shaper
- Posts: 8331
- Joined: Sat Feb 07, 2009 1:40 pm
- Location: M͈̙̞͍͞ͅE̹H̨͇̰͈͕͇̫Ì̩̳CO̼̩̤͖͘ జ్ఞా
Re: Increasing Recall radius
Hmm. I would first check weapons.dat and see if there is a weapons.dat entry for it, and it has any radius set. Been many years since I have looked at anything sc1 so I can't remember if it's hardcoded or not.
-
- Terran Settler (Unemployed)
- Posts: 3
- Joined: Tue Nov 05, 2013 5:13 am
Re: Increasing Recall radius
No entry for Recall in weapons.dat using DatEdit
-
- Terran Refinery Attendant
- Posts: 26
- Joined: Wed Apr 03, 2013 11:24 pm
Re: Increasing Recall radius
Maybe it's an exe edit in Firegraft, like the one that makes Recall teleport units from the Arbiter to the target point, though I'm not sure if exe edits work well anymore.
Failing that you will probably have to to look into the General Plugin Template Project and actually inject code into SC just to change that radius.
Failing that you will probably have to to look into the General Plugin Template Project and actually inject code into SC just to change that radius.
- mark_009_vn
- Zerg Drone Masseur
- Posts: 356
- Joined: Fri Nov 04, 2011 5:56 am
- Location: [[THIS USER, HE IS A CHAR]]
Re: Increasing Recall radius
And that also won't work because Recall is totally hard coded. You can't change it's radius even with plugins (unless you do some serious hack-job), you can at best change what unit is able to cast Recall... that's about it.tf- wrote:Maybe it's an exe edit in Firegraft, like the one that makes Recall teleport units from the Arbiter to the target point, though I'm not sure if exe edits work well anymore.
Failing that you will probably have to to look into the General Plugin Template Project and actually inject code into SC just to change that radius.
"I'm begging you, let me work!" - Osamu Tezuka
-
- Terran Settler (Unemployed)
- Posts: 3
- Joined: Tue Nov 05, 2013 5:13 am
Re: Increasing Recall radius
Yeah, the Firegraft EXE edits has no function for it and I also checked the GPTP files and there appear to be no lines for that as well. Guess I'm stuck with it.
EDIT: Ok, as it turns out there was a newer version of Firegraft than the one I had, and this time there were EXE edits that allowed increasing the range to a maximum of double the original.
EDIT: Ok, as it turns out there was a newer version of Firegraft than the one I had, and this time there were EXE edits that allowed increasing the range to a maximum of double the original.